I didn’t give this item really any rating to be honest I haven’t used it yet

I have T posts for my other steel targets but wanted some smaller challenging pistol targets so this worked out great.

I have the luxury of having enough land that I have my own personal shooting range. I found this method of hanging targets is the best for mowing the grass around the targets. Also I can put up more targets than using a simple sawhorse. I use a 8 foot 2 x 4 and can usually put up four to six targets.

Great I am easy to use nice to hang steal off of it

These are great. I have been using my first for three years.

Works perfectly, purchase a set for top horizontal and a set for a lower horizontal, that allows a person to staple paper or cardboard targets without them moving in a breeze. A high quality,inexpensive item for making setup and take down fast and easy

Same as all there products. Excellent fit, ready to use

I've been using the t post brackets to hang my steel targets for several years. They make setting up quick and easy.

These brackets make putting up these targets a breeze. Sturdy construction assure they wont bend. Great priduct!

Didn’t care for using the t post. The brackets are ok and do what they are meant to do but I didn’t like that setup.

Easy and sturdy. Multiple ways to use.

Makes hanging supre easy!

Quality’ products and top notch customer service!

Have a 10 foot 2x4 hooked up hanging all sorts of targets. Sweet

These work great, easy to set up and take down, makes time at the range more efficient. Since all tposts are not created equal, some seem to be a little bent at the top, some are a little thicker than others, etc. it might be helpful to make the slots even a millimeter or 2 wider, assuming they'll still attach to the post without falling. I've noticed I have one tpost that I can't get any of these hangers on to because of the tight tolerance of the hanger. All in all they're a great product and I'll definitely buy more when the time comes!

I’ll be ordering a few more of these to hang some pistol targets!

Work as advertised.

Great for running multiple targets on a 2x4 in multiple layers top to bottom with these brackets.

Although my black powder club has knock down silhouettes I wanted my own since I can set up my bison,and pig at different distances. I used the T post bracket with a t post and 2X4 and hooks for the chains from shooting targets 7. My fellow club members though that I had fabricated the bracket,and they stated that some really bright individual designed the bracket (not I). I modified the bracket by drilling two holes to rest each two 3" bolts on either side of the pole to keep the 2X4 level if I used only one silhouette.When using the big game kill zone I can place it either side of the 2X4 and it would be level. Great idea and easy to transport in my compact car......

Just bought 2 of these. Nice concept and the quality and design is fine. But they are not designed to fit on all t-post. Unfortunately a lot of T-post are not perfect at the head, some have a little curvature or are a little bigger/wider on the cross of the T, therefore you can not slip the bracket on to the post. if the "t" cut out in the bracket was about 1/8" wider it might work. I tried them on 15 T-post and only got them to fit on 1. So until this design issue is fixed, take the bracket with you and try it on the Y-Post before you buy them. ## Marks Note, I've not had that issue with any of the T Posts that I have used but your suggestion of bringing a bracket the store to check the posts before you buy is a good one. If your t-posts are not new and have been driven with a sludge hammer you may also see this issue. Unless you have a proper T-Post driver it would be best to put the bracket on first before the top of the post gets fattened up during driving. Another option might be grinding the fat portion off with a file or grinder if needed. Thank you Paul for your review. -Mark

These are simple and they work! And the right price!

very slick and easy way to utilize T Posts for hanging targets. easy to set up and break down. I bought 3 for my 22 steel range. great idea.

Bracket fit T post perfectly!

I got these brackets, a couple T-posts and 2x4's, some wood screws, and a few screw hooks and hook eyes. It didn't take long for my nephew and me to build two target stands, one for him and one for me. We hung multiple plastic targets (like milk jugs and clear plastic packaging material--things that don't cause bb's to ricochet back at the shooters) from his target stand, and shot the targets with bb guns. It worked great. I'll use my target stand for shooting steel.

Got 4 to rework our range. The usual heavy, well made and make me wish that we had come up with the idea. It is really nice to have a company that makes things as I would without all of my procrastination.

I bought 2 of these and made a nice target... paired with the mounting kit, you cant go wrong.

These work perfectly. Whether you use one in the middle of a 2x4 or one on each end of a ten foot 2x4 like I did. Makes it easy to hang and remove.

Bought these to use on a portable system I made to take camping to help save room. Attached them to a 2x6 plank of cedar and it worked perfect. Set up, and break down were a breeze leaving more time for shooting! Take the bracket with you when purchasing your T post to ensure it'll fit! T post aren't the most uniformed pieces of metal at the the top, they can be mushroomed out pretty bad. So taking that bracket will save you time and any potential returns of t bars in the long run. Wish I would've invented something like this bracket! Easy to use, effective, does what it's supposed to do, and seems to be very well made!

I was looking for a inexpensive way to hang targets and these fit the bill.

These brackets are very neat! Very simple too... I purchased 2 of these and attached a 2x4 about 5 feet across and mounted 2 2/3 torso plates that we use for handgun practice. They work great! easily set up! I did use screw hooks and ST7's mounting kit(bolts/nuts/chain) and in no time(about 20-30 minutes, including driving 2 T-posts into the ground) it was set up. Easy to take down if needed to also(well, maybe not the T-post, but everything else just slips off). Will definitely be purchasing more of the brackets in the future to mount a rifle target.

initially bought just one. but with 2 10" bullseye targets mounted, it had too much swing. I bought another on and went with one on each end of the support board. rock solid. it fit every T-post I tried it on at the store. great value and product. will buy more when it's time to expand the range.

Work on heavy t-posts, no problem even after installing the t-post. Work perfectly, used 2x6 instead of 2x4, one on each end and hung multiple targets. Least expensive place to purchase these brackets!

Everything this company offers is unmatched. This is my one stop shop for targets.

Very nice quality, edges are finished well. We are hanging 10" plates from them at our club outdoor range.

This is exactly what I've been looking for. I need something that I can break down easily and keep in the back of my SUV. The wooden stands I've been using were just too bulky. This is perfect for mounting my silhouette steel target (which I bought here and is another great product). I keep a 4 lb. engineer's hammer (to pound the post in the ground) in the back of the SUV, so I'm ready to go to the range at short notice. I highly recommend this bracket. You can't beat the price, quality, and fast shipping. I'm telling everyone about it at the shooting club.

I bought 4 of these to test. Have mounted two on a 5' 2X4 with a 1/2" silhouette target. So far all looks good after two days of shooting. Very easy to mount and handy to position with T posts. Maybe the brackets should be a heavier gauge but cnnot tell without more time. They should hold up. Glad I bought them.

Using these on 2 T stakes, with a 2x4 and the chain hanger sets, I have three 4" gongs setup in my back yard. Perfect for 9mm practice.

This bracket fills a need that has been out there for a long time. I like the ability to break it down easily and carry it in the back of my car. Just put the bracket over the T-post and you are ready to go. I highly recommend this bracket to anyone wanting a great way to mount your steel targets!

I like simple and this method of hanging targets is easy and quick. I bought two of these brackets but one seems to do the trick. This makes setup for steel targets easy and fun. It just plain works for me.....ג­ג­ג­ג­ג­.....

This was a great idea. Been looking for a way to hang my targets and these brackets work great. Heavy duty, I use a two post set up with a 2X6 and it is rock solid. Thanks for coming up with this idea at a great price. Thanks for the fast shipping, Bentwrench

I have ordered these for all my targets. Never had any ricochet incidents. These make targets safe.

Fast shipping excellent service. Product works excellent

I recently purchased 3 each of the 6 inch and 8 inch gongs; I also received a free 4 inch gong. I purchased the needed hardware: chains, nuts, washers, bolts and metal T-post brackets. With a few pieces of 2x8 pressure treated wood, I got everything up and invited my longtime shooting buddy over to try things out. We loaded up our revolvers and pistols and had a blast! The instant feedback with steel vs. paper is terrific. I am a new fan of shooting steel! I will use paper to sight in a rifle, but for just plain fun you canג€™t beat steel. I spaced the targets, hung in pairs, at different distances and about 7 or 8 yards apart horizontally. This allows shooter movement and spaces the various sized targets at different distances which I feel is excellent training. I have watched many steel matches on TV and always thought varying the target size, distance and shot angle would improve my shootingג€¦time will tell. Due to retirement, I am a cost conscious shopper. I looked at several products and these are the best priced targets I found. The prepackaged hardware is also inexpensive and definitely the way to go. Everything you need is in the bag so all the decision making for the items needed is done for you. The quality of everything is outstanding. These folks have really thought through the design and the proper method to hang targets to avoid ricochets. I couldnג€™t be more pleased with my purchase. I see more steel targets in my future. To sum things up: these folks have a great product, ship very quickly and the design and quality are excellent. Look no further, buy from Shooting Targets 7. You will be well pleased.

I bought this product to setup some quick targets at a friends house. He install the T-post and I brought the rest. Slipped the board with the bracket on to the T-post and we were ready to shoot.

GREAT PRODUCT

Very good product. Works great for hanging small targets and I also use them for hanging blue bird houses. It's a lot easier than using 4x4's. Shipping very reasonable.CALZADA plar

Great product. work well. sturdy and strong. I mounted them to 2x6s and they carry the load easily. well worth the price.

Setting up new range at different location and so far the straps and T-Post brackets appear to be the ticket. Love the straps so far, no twisting or large movement of the steel. Customer service is top notch, product and pricing 2nd to none.

Using two to hang a gong at 500 yards from a 2x4. No issues. Work as advertised.

Bought 8 of these to hold 2x4s on T posts. They work extremely well. I think they will even hold 2x6 as well. I will buy more.

These were heavier gauge than I was expecting and very rigid. I'm using them for racks at 50, 100, 300, and 500 yards. I have no doubt that they will hold up extremely well. Shipping was fast!

Worked better than I expected. Plenty heavy enough for AR500 targets. These brackets makes setting up targets quick and easy. Priced right for setting up multiple target settings.

Only had to grind deformed end off an old steel post for it to slide on. Used a 2X6 to hang a 6" gong on one side and a paper target frame on the other side at 100 yrds. Works great!

The bracket was simple and easy to install. I used 2x6. They seem more stable. I bought 8. Should have bought more. They are an inexpensive way to set up a range

BIG PROS: Initial set-up was fast. (2) T-posts, (2) T-post brackets an some stainless hooks in a 2x6 to attach the mounting kit chains gives me a consistent and securable targeting system. I can leave the post in the ground and secure the targets quickly and effortlessly. SMALL CON: The T-post brackets are a little tuff to get on and off the T-post if the ends mushrooms from hammering or distort from a round strike. HOWEVER: This is the simplest, quickest and best targeting system I have used. I will continue to use these brackets with t-posts, I will just leave my support assemble in the ground and secure just secure the gongs between chances to shoot.

Fast delivery and a Great Value! Absolutely a quality product from a quality company! Steve P

On line ordering was easy. Shipping very fast. The T-post brackets are well made and heavily galvanized so they will last a long time.

I could not resist the price, I had to try one. Very heavy gauge. Screwed it to a 2x6 mounted the gong target added a little weight to the opposite side of the 2x6, hung it on a T post fence post and started shooting. This bracket makes simple to mount & hang targets. Much better than making an A frame type hanger or some other method. Put it up or take it down, very simple. I love it.

These brackets are great to hang targets, using standard fencing t-posts. The only problem I found was not with these brackets, but with the posts. When the posts are manufactured, the tops are just chopped off, leaving a distorted top edge. It's sometimes difficult to get the bracket started down the post, so a little touchup with a hand grinder on the post may be needed. I like the ability to be able to adjust the height of the targets on the posts. I used the heavy duty t-posts for all my targets. If you have heavy targets, you may want to consider using a 2 x 6 to hang the targets, instead of a 2 x 4. With the hole spacing of the bracket, I was able to get more screws into a 2 x 6 to anchor it to the bracket. I would suggest using at least #10 diameter screws.

These work very well at my home range. I set posts at various ranges for handgun practice and one for my .22 and centerfires at 100 yds.(my limit). Much easier then my prior arrangement. Might have to look into your rubber straps, as my grandchildren broke two of my chains. Have to work with them more. Ha.

The bracket is designed for a BALANCED load. I have my own "one point" range - one bench, sockets (2.5" PVC driven into the ground to accept the target board frame) at 25, 50, 100, 200, and 300 yards - and one "gong". I mounted it centered, which (DUH!) allows the T-post to stops most "swing". I'm either going to have to buy another 10", or figure out a way to somehow balance the load on the bracket. That's not Mark's fault, but mine, for not engaging my brain before ordering! I have used it at 300 yards with 223/5.56, which isn't exactly "crushing", and at 50 yards with 22LR, and I have no complaints. It's a good product, one that fills a need. You just have to be smarter than the bracket! :-)

Easy to put up. Strong mount.

I recently purchased 3 each of the 6 inch and 8 inch gongs; I also received a free 4 inch gong. I purchased the needed hardware: chains, nuts, washers, bolts and metal T-post brackets. With a few pieces of 2x8 pressure treated wood, I got everything up and invited my longtime shooting buddy over to try things out. We loaded up our revolvers and pistols and had a blast! The instant feedback with steel vs. paper is terrific. I am a new fan of shooting steel! I will use paper to sight in a rifle, but for just plain fun you can’t beat steel. I spaced the targets, hung in pairs, at different distances and about 7 or 8 yards apart horizontally. This allows shooter movement and spaces the various sized targets at different distances which I feel is excellent training. I have watched many steel matches on TV and always thought varying the target size, distance and shot angle would improve my shooting…time will tell. Due to retirement, I am a cost conscious shopper. I looked at several products and these are the best priced targets I found. The prepackaged hardware is also inexpensive and definitely the way to go. Everything you need is in the bag so all the decision making for the items needed is done for you. The quality of everything is outstanding. These folks have really thought through the design and the proper method to hang targets to avoid ricochets. I couldn’t be more pleased with my purchase. I see more steel targets in my future. To sum things up: these folks have a great product, ship very quickly and the design and quality are excellent. Look no further, buy from Shooting Targets 7. You will be well pleased.

this is the best bracket I have ever seen. love the way it adjust up and down on the T post

I like simple and this method of hanging targets is easy and quick. I bought two of these brackets but one seems to do the trick. This makes setup for steel targets easy and fun. It just plain works for me.....⭐⭐⭐⭐⭐.....

Great way to make use of all those fence posts laying around!

T Posts are cheap and these attach easily. I found they work best when using 2 posts - one post only can be shakey or uneven. Love the 2 post setup though and I'm sure these will get a lot of use.

Works great easy to use. Recommend to everyone.

Love this simple little product! Makes for a very inexpensive and portable set-up for shooting steel.

Works best with two t-posts. Fit the t-post perfectly. You can mount a 2x4 or 2x6 easily.

These guys are great Shipped fast and CHEAP . When ordering targets and supplies shipping is usually the biggest expense . They have a flat rate.Also being a veteran I will buy from them first if prices are competitive They were about 60 % cheaper than anywhere else I looked

Super great idea. 4*2 are very cheap and with a T-post in the ground or a concrete filled bucket you have your targets hanging. Really great idea!!!

Easy to install. Works great.

Slid right on the T-post. Very easy to maneuver my 2x6s after they were attached.

This bracket is the most cost effective and simple way I have seen to hang your gong targets. Bought more so we can have multiple targets set at different distances. I gave shipping a 3 because I paid more for postage than I did for the product but that is because the price for the bracket is so low. Some of my friends saw these and they are buying several as well. Pretty smart person who came up with this bracket concept.

Works great

Using these at 100 yard range and sure make maintenance a lot easier Hidden Valley Sportsmens Club

I decided to do a litttle modifying of my "range". After seeing the ad for these T Post Brackets I decided to give them a try. I am really pleased with the way things worked out. These are a good product that worked well for me.

Awesome product, well thought out and easy to use in multiple ways. I ordered 4 of them so I could hang cardboard in-between for paper and my gongs off of the bottom.

Live on ranch with miles of t-posts fencing, so this was a great way to use existing equipment. I have multiple sets of targets up with swinging steel targets from ShootingTargets7, including zombies and ISIS head.

Bought one to try. Best to have roughly equal weight targets on both sides of t-post to balance properly. Two brackets and two posts with targets suspended in between would be better. Probably least expensive way to hang. Try ST7 t-post steel mounts instead (see mounting accessories). More $, but they are very good, stable and solid.

Haven't used yet but I am sure will be fine. Well pleased with everything purchased from Shooting Targets 7.

Use these and 2 T post to hang 6 8" 3/8 targets on chains and have had no problems. Buying more

I use these on my t post as sign and target hangers. They are fast and easy to change. I keep extras in my range all the time

Easy to use and well designed. They're versatile and easy to take on or off. Use them to hang a plywood backer or use them to hang a 2x4 for your gongs. They give me more time to shoot at the range with less effort. If you buy these T post brackets you should also get some of the rubber hanging straps sold here. They're good, thick quality rubber, they'll take a lot of abuse. I ordered my T post hangers and saw the straps after finishing my purchase. Not wanting to pay shipping on two orders I gave them a call and got Mark on the phone, he added the straps to my order no problem. Will absolutely continue doing business with ShootingTargets7. Everything I've ordered from the gongs to these brackets and the straps have been excellent excellent quality at a better price than any other shooting steel I've found.

Living on the farm, these T-post hangers work great. With miles and miles of fencing I can set up a range anywhere along the fence.

One of the cheapest and easiest ways to hang targets. Add a 2x4 and a couple of T posts and you have a very stable target hanger.

Great hangers. Shipping was prompt as always with ST7.

Another great buy with great service and fast shipping. I'm a repeat customer, so I'm glad to recommend Mark and his team with great enthusiasm!

Very good quality. would buy again.

Hangers easy to set up and well designed. Great service by ST7.

Great service and fast shipping as always with ST7. I'm a repeat customer. Everything I've ordered from these guys - gongs to straps to these brackets have been excellent quality at a better price than others I've found. Great hangers. Purchased 10. Least expensive and easiest ways to hang targets. Add a 2x4 and a couple of T posts and you are ready to shoot.

a very simple, inexpensive,compact and effective way to hang steel or any other target on any type of terrain. Whether using 1 or 2 t-post the possibilities are endless. Great product

Good option to use when hanging steel from T Posts and I have lots of targets to hang!☺

Well designed, good quality.

I didn't know if these would be any good but I figured, at that price, I might as well try it. Very satisfied.

this is a great product. easy way to setup long distance targets

This item is very easy to install just add a few feet of 2x4 or 1x4 and a $5.00 tpost and youll have something to hang your items on. Push it in deep and itll hold steady through hundreds of rounds.

This product is good for setting up targets wherever you can drive a T post into the ground.

Great value! I started out building long leg saw horses to hold my gongs, then I went to the earlier style Tpost bracket. It was okay but it had its drawbacks. This new style is cheap, and simple. Who could ask for more? In addition to my own brackets I have given 3 of them away as gifts.